Asus TR-DLS Computer Hardware User Manual


 
33
3. HARDWARE SETUP
ASUS TR-DLS Users Manual
3. H/W SETUP
Connectors
4) Wake-On-LAN Connector (3-pin WOL_CON)
This connector supports a LAN card with a Wake-On-LAN output. The connector
powers up the system when a wakeup packet or signal is received through the
LAN card.
IMPORTANT: This feature requires that the BIOS item Onboard LAN Power
Up is enabled (see 4.5.1 Power Up Control) and that your system has an ATX
power supply with at least 720mA +5V standby power.
5) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card. NOTE: For external modems, Wake-On-Ring
is detected through the COM port.
TR-DLS
TR-DLS Wake-On-LAN Connector
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt StandbyPME
Ground
WOL_CON
TR-DLS
TR-DLS Wake-On-Ring Connector
WOR
Ring# Ground
21