Asus TR-DLS Computer Hardware User Manual


 
ASUS TR-DLS Users Manual 49
4. BIOS SETUP
4. BIOS SETUP
Master/Slave Devices
4.3.1 Primary & Secondary Master/Slave
Type [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection
is successful, Setup automatically fills in the correct values for the remaining fields
on this sub-menu. If automatic detection fails, this may be because the hard disk
drive is too old or too new. If the hard disk was already formatted on an older system,
Setup may detect incorrect parameters. In these cases, select [User Type HDD] to
manually enter the IDE hard disk drive parameters. Refer to the next section for
details.
CAUTION! Before attempting to configure a hard disk drive, make sure you
have the correct configuration information supplied by the drive manufacturer.
Incorrect settings may cause the system to fail to recognize the installed hard
disk.