Filter
Top Products
Installation
To install the CN-5000, refer to the installation diagram below (the diagram
numbers correspond to the numbered steps), and do the following:
1. Plug the local administrator’s keyboard, mouse, and monitor into the
unit’s Console Ports.
2. Use the KVM cable provided with this package to connect the CN-5000’s
KVM Port, to the Keyboard, Video and Mouse ports of the server or
KVM switch that you are installing.
Note: For more information regarding KVM cables, see p. 8.
3. Plug the LAN or WAN cable into the CN-5000’s RJ-45 socket.
4. Plug the power adapter cable into the CN-5000’s power jack, then plug
the power adapter into an AC power source.
5. Power up your server or KVM installation.ca
1
5
3
KVM Switch
2
4
2005-09-13
2. Hardware Setup
9