Filter
Top Products
Radius
If you are using a RADIUS server, RADIUS Configuration allows you to set
up its parameters:
1. Check Enable RADIUS.
2. Fill in the IP addresses and Service Ports for the Primary and Alternate
RADIUS servers.
3. Set the time in seconds that the CN-5000 waits for a RADIUS server
reply before it times out in the Timeout field.
4. Set the number of RADIUS retries allowed in the Retries field.
5. Key the Shared Secret character string that you want to use for
authentication between the CN-5000 and the RADIUS Server in this field.
2005-09-13
CN-5000 User Manual
22