Filter
Top Products
Screen Elements
The icons arranged horizontally across the top of the page are linked to the
administration utilities, which are used to configure the CN-5000. Your
ability to make configuration changes depends on the permissions associated
with your login information (see User Management, p. 24). Use of the
administrative functions is discussed in Chapter 4.
The icons arranged vertically down the left side of the page are used to
operate the CN-5000. Their purpose is discussed in the table below:
Icon Purpose
Saves the changes you make in the administration dialog boxes
(see the Administration chapter), but does not implement the
changes. The changes only go into effect when you enable
Reset on exit (see p. 26 for details) and log out.
Allows users with the proper permission (see p. 25), to connect
to the CN-5000 using Windows software, and to remotely
control the connected server (or servers via a KVM switch).
For platform independence, the Java client allows users with the
proper permission (see p. 25), that have Java installed to
connect to the CN-5000 and to remotely control the connected
server (or servers via a KVM switch).
If a Power over the NET™ module is connected to your
installation, and if you have the proper permission (see p. 25),
clicking this icon will bring up its interface.
All the events that take place on the CN-5000 are recorded in a
log file. If you have the proper permission (see p. 25), clicking
this icon displays the contents of the log file.
Click this icon to log out and end your CN-5000 session.
Note: It is important to log out when you end your session.
Otherwise, you must wait until the timeout setting has expired
before the CN-5000 can be accessed again. (See Time out
control under the Customization dialog box, p. 26.)
2005-09-13
CN-5000 User Manual
14