Filter
Top Products
4. To filter a single IP address, key in the same address as the start IP. To
filter a continuous range of addresses, key in the end number of the range.
After filling in the address, click OK.
5. Repeat these steps for any additional IP addresses you want to filter.
To delete a filter, select it and Click Remove. To modify a filter, select it and
Click Edit. The Edit dialog box is similar to the Add dialog box. When it comes
up, simply delete the old address and replace it with the new one.
User Station Filtering - MACs:
To enable MAC filtering for User Stations, Click to put a check mark in the
MAC Filter enable checkbox.
To add a filter:
1. Select whether to include or exclude the filter.
2. Click Add. A dialog box similar to the one below appears:
3. Specify the filter address in the dialog box, then Click OK.
4. Repeat these steps for any additional MAC addresses you want to filter.
To delete a filter, select it and Click Remove. To modify a filter, select it and
Click Edit. The Edit dialog box is similar to the Add dialog box. When it comes
up, simply delete the old address and replace it with the new one.
2005-09-13
4. Administration
21