Filter
Top Products
Firmware
New versions of the CN-5000 firmware can be downloaded from our website:
www.aten.com.tw
as they become available. To upgrade the firmware, do the following:
1. After downloading the new firmware file to your computer, click the
Firmware icon to open the Firmware configuration dialog:
2. Click the Browse button; navigate to the directory that the new firmware
file was downloaded to, and select it.
3. Click Upload.
4. After the upload completes, click the Apply icon at the left of the web
page.
5. Enable the Reset on exit checkbox (see Customization, p. 26).
6. Click the Apply icon at the left of the web page, again.
7. Click the Logout icon at the upper right of the web page (see p. 12) to
exit and reset the CN-5000.
2005-09-13
4. Administration
27