Filter
Top Products
Overview and Testing
Testing Extensions and Connections
The Switch Administrator now needs to assign analog lines and extensions for
each AUDIX Voice Power channel. Service Technicians should then run the lines
and perform ring-through tests to determine that all lines are working. This
procedure verifies that connections can be established over each circuit.
Before proceeding, record the extension numbers that the Switch Administrator
has assigned to each channel on FORM A in the Planning Guide. A sample is
shown below.
WARNING:
Do not use an ambiguous extension for the DCP board or for any of the
channels assigned to AUDIX Voice Power. An ambiguous extension is one
that is shorter than the maximum length and also starts with a digit that
could be part of a longer extension under the switch dial plan.
FORM A
Channel Assignments
Channel
Service
Extension
o
1
2
3
4
5
6
7
8
I
9
10
11
1-4