Filter
Top Products
iSystem 75 and DEFINlTY G1 Initial Implementation
Creating Hunt Groups
To create a hunt group, use the
add hunt-group
command and:
1.
Assign a group number between 1-100.
2.
Assign a group extension.
This extension must be a valid extension in the
switch dial plan.
3.
Enter the extensions of the analog channels that you are assigning as
members of the hunt group on Page 2 of the hunt group form.
(See Figure 3-7.)
NOTE
When you enter the extension, the name is filled in automatically.
Page 1 of
5
HUNT GROUP
Group Number: 1
Group Extension: 30000 Group Type:
ucd
Group Name: auto attendant
Coverage Path:
Security Code:
Message Center: none
Queue? y
Night Service Destination:
Queue Length: 2
Calls Warning Threshold:
Calls Warning Port:
Time Warning Threshold:
Time Warning Port:
First Announcement Extension:
Announcement Delay
COR: 1
ACD? n
(sec):
Figure 3-6.
Hunt Group Form (Page 1)
3-13