Filter
Top Products
System 75 and DEFINITY G1 Initial Implementation
Changing Coverage Paths
Use the change coverage path command to make the appropriate changes.
COVERAGE PATH
Page 1 of 1
Coverage Path Number: 6
Next Path Number:
Linkage:
COVERAGE CRITERIA
Station/Group Status
Inside Call
Outside Call
Active?
n
n
Busy?
y
y
Don’t Answer?
SAC/Go to Cover?
y y
Number of Rings: 2
n
n
y
y
COVERAGE POINTS
Point1: h7
Point3:
Point2:
Figure 3-8. Call Coverage Form
Performing Subscriber Administration
Verify the information for each subscriber on the switch who will be a subscriber
on the AUDIX Voice Power using the change station command. Assign each
station’s parameters as follows (see Figure 3-9):
1.
Verify that the
Name:
field exactly matches the name recorded on
FORM D in the
Planning Guide. If not, change FORM D.
2.
Enter the coverage path number which contains either the DCP extension
(for integrated systems) or the Call Answer Hunt Group extension
(for non-integrated systems).
3.
Enter 1 as the COR or whatever COR was assigned to Subscribers.
(Integrated only.) (See Figure 3-1.)
3-15