AT&T 2.1.1 Time Clock User Manual


 
System 75 and DEFINITY G1
Initial Implementation
The information in this section is intended to help you and the System 75 or
DEFINITY G1 Switch Administrator work together to administer the switch and
meet the specific requirements on the switch for your AUDIX Voice Power
system. To complete these tasks, you will need to access information regarding
switch administration, and use the accompanying forms for the switch.
AUDIX Voice Power is designed to operate with a System 75 or DEFINITY G1
Private Branch Exchange (PBX) using analog lines. T
O
integrate the PBX with
AUDIX Voice Power, the PBX also requires a connection from a TN-754 board
to the AUDIX Voice Power DCP board.
Verifying Software Release
Before beginning the switch administration, verify the system software release.
If the PBX is a System 75 with release R1V3 software, verify that software
vintage 17091 (Issue 1.7) or greater has been installed.
If the PBX is a DEFINITY G1, verify that software Issue 4.0 or greater has
been installed.
If you have an R1V3 or G1 and you do not have the proper software, DO NOT
proceed with the switch administration. Instead ask your AT&T Representative to
contact the AT&T Sales and Technical Response Center at 1-800-521-7872 to
obtain the correct software. Once it has been installed, you may proceed with the
switch administrate ion.
3-1