Filter
Top Products
AUDIX Voice Power Initial Implementation
Displaying Feature Access Codes
The codes used by System 75 or DEFINITY G1 to activate/deactivate the
Message Waiting Lamp should be verified by logging into the switch and entering
display
feature-access-codes
on the command line.
Page 2 of the Feature Access Code form lists the codes needed to
activate/deactivate the Message Waiting Lamp. (See Figure
2-1.)
The following
fields in the Feature Access Code form should be compared against FORM C. If
necessary, update FORM C in the Planning Guide to reflect the values displayed
on the Feature Access Code form.
■
Leave Word Calling Send a Message: —Use this value for the
AUDIX Voice Power System Parameter
Code to Light.
■
Leave Word Calling Cancel a Message:
—
Use this value for the
AUDIX Voice Power System Parameter
Code to Extinguish.
Page
2 of 3
FEATURE
ACCESS CODE (FAC)
Group Control Restrict Activation: 125
Deactivation: 126
Hunt Group Busy Activation: *8
Deactivation: #8
Last Number Dialed Access Code: *9
Leave Word Calling Message Retrieval Lock: *1
Leave Word Calling Message Retrieval Unlock: #1
Leave Word Calling Send a Message: *4
Leave Word Calling Cancel a Message: #4
Print Messages Access Code:
Priority Calling Access Code: *7
Program Access Code: *0
Send All Calls Activation: *3
Deactivation: #3
SMDR Account Code Access Code: *6
Transfer Into AUDIX: 123
Trunk Answer Any Station Access Code:
User Control Restrict Activation: 105
Deactivation: 106
Voice Coverage Message Retrieval Access Code: 140
Voice Principal Message Retrieval Access Code: 141
Figure
2-1.
System 75/DEFINITY
G1
Feature Access Code Form (Page 2)
2-12