Filter
Top Products
Chapter 4 X-Switch CLI & ATM Terminal Interface
Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide 55
Set Primary Version
The M-ACC stores two software versions. The version which is currently running is
called the Primary version. A pointer (asterisk - *) shows which version is currently
the primary one.
To set a different primary version, select option 4 from the Setup Main Menu. A
menu similar to the following displays:
Primary Version Screen
M-ACCF S/W Version: 4.2.2 Slot #: 5
<CR> Refresh the screen
0. Return to Previous Menu
1. Save the Session
-----------------------------------
Select the Primary version
(The current primary is marked by *)
2. Version 1.0.3
3. * Version 1.0.1
>>>Enter your choice:
Once you select and save the desired primary version, you are prompted to reboot
the M-ACC. Type y and the M-ACC will set the pointer accordingly, and reboot
from the newly-defined primary version. If you don't wish to reboot at this time, the
pointer is saved, but the M-ACC continues running from the old version.
Set Defaults to Factory Settings
You can set the M-ACC’s configuration back to its default factory settings by
selecting item number 3 in the Module Setup Main Menu. The following
confirmation and warning messages are displayed:
*** Set default values ***, Confirm [y/n]?y
***WARNING*** - Management parameters were changed. Reset the agent!!
Before exiting this session, select the option Reset the M-ACC from the Module
Setup Main Menu.
Create Report
This command is intended for use by Avaya Technical Support personnel and provides
a comprehensive report of the status the M-ACC module of each port.