Filter
Top Products
Chapter 4 X-Switch CLI & ATM Terminal Interface
76 Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide
Caution: Before you reset the ATM access module, please check that the download is
complete (download_success should be displayed in step 8 above). Any reset
before the download is complete may make the module unusable.
9 After the software upgrade procedure is completed, you must reset the ATM
access module in order to validate the new software version.
Monitoring the ATM Access Module
This Section describes how to monitor the status and performance of your ATM
access module and provides a brief overview of the additional statistics that are
available when you install an ATM access module.
See the user guide that accompanies the ATM Switch for information about the
statistics that are provided by the ATM Switch software.
ATM access module statistics screens are updated every 2 seconds to show the latest
information.
The ATM access module provides the following statistics:
•ATM Port Statistics
• VCC Statistics
ATM Port Statistics
The ATM Port Statistics screen provides a top level summary of traffic levels on the
ATM port. You can use the summary to estimate the amount of traffic on your
network backbone, and to check the validity of the incoming connection.
To view the ATM Port statistics:
1 Select the
[2] atm option from the Main Menu. The ATM submenu is
displayed, as shown in Figure 4.21.
Figure 4.21 ATM Submenu
Select the
[1] port option from the ATM submenu. The atm/port submenu
appears. Then select the [2] statistics option.
ATM Menu
========
[1] port - Administer the ATM port ->
[2] vcc - Administer VCCs ->