Filter
Top Products
Chapter 11 Avaya P330 Layer 2 Features
84 Avaya P334T-ML User’s Guide
Automatic VLAN Learning
The Avaya P330-ML learns the VLANs automatically from traffic received on ports
in “bind-to-all” mode. The maximum number of VLANs, 252, includes these
dynamically learned VLANs and any VLANs you added manually.
When the VLAN list for the switch is full, no further dynamic learning or manual
VLAN configuration will be possible until the dynamically learned VLANs are
deleted from the table. This is accomplished with the clear dynamic-vlans CLI
command.
Ingress VLAN Security
When a VLAN-tagged packet arrives at a port, only the packets with the VLAN tag
corresponding to the VLANs which are configured on the port will be accepted.
Packets with other VLAN tags will be dropped.
VLAN CLI Commands
The following table contains a list of the CLI commands for the VLAN feature. The
rules of syntax and output examples are all set out in detail in the Reference Guide.
In order to... Use the following command...
Assign the Port VLAN ID (PVID) set port vlan
Define the port binding method set port vlan-binding-mode
Define a static VLAN for a port set port static-vlan
Configure the tagging mode of a
port
set trunk
Create VLANs set vlan
Display the port VLAN binding
mode settings
show port vlan-binding-mode
Display VLAN tagging information
of the ports, port binding mode,
port VLAN ID and the allowed
VLANs on a port
show trunk
Display the VLANs configured in
the switch.
show vlan
Clear VLAN entries clear vlan