Filter
Top Products
Chapter 11 Avaya P330 Layer 2 Features
Avaya P334T-ML User’s Guide 93
Spanning Tree Protocol CLI Commands
The following table contains a list of CLI commands for the Spanning Tree feature.
The rules of syntax and output examples are all set out in detail in the Reference
Guide.
In order to... Use the following command...
Enable/Disable the spanning tree
application for the switch
set spantree
Set the bridge priority for spanning
tree
set spantree priority
Set the RSTP bridge spanning tree
max-age parameter
set spantree max-age
Set the RSTP bridge hello-time
parameter
set spantree hello-time
Set the RSTP bridge forward-delay
time parameter
set spantree forward-delay
Select between STP operation or
RSTP switch operation
set spantree version
Display the bridge and per-port
spanning tree information
show spantree
Set the TX hold count for the STA set spantree priority
Add a port to the spanning tree
application
set port spantree enable
Remove a port from the spanning
tree application
set port spantree disable
Set the port spantree priority level set port spantree priority
Set the cost of a port set port spantree cost
Set the port as an RSTP port (and not
as a common STA port)
set port spantree force-protocol-
migration
Display a port’s edge admin and
operational RSTP state
show port edge state
Set the port as an RSTP edge port or
non-edge port
set port edge admin state