Filter
Top Products
Chapter 11 Avaya P330 Layer 2 Features
112 Avaya P334T-ML User’s Guide
Multilayer Policy CLI Commands
The following table contains a list of the CLI commands for the Multilayer Policy
feature. The rules of syntax and output examples are all set out in detail in the P330
Reference Guide.
In order to... Use the following command...
Set the default action for a given
Policy List.
ip access-default-action
Create an access-list rule in a
specific Access List.
ip access-list
Set the source list, destination list,
and destination module for copying
an entire Policy List
ip access-list-copy
Set the DSCP-to-COS mapping.
Based on range and action
parameters, system will apply
mapping to frames
ip access-list-dscp operation
Designates which original frame
fields influence internal queues
selection
ip access-list-dscp trust
Assign a name to a Policy List ip access-list-name
Add the name of an owner to a
Policy List
ip access-list-owner
Delete an access-list element or a
Policy List
no ip access-list
Activate a Policy List ip access-group
Deactivate a Policy List no ip access-group
Display the DSCP to CoS map of a
policy-list
show ip access-list dscp
Set the list cookie for a specific
policy list
ip access-list-cookie
Display an access-list show ip access-list