Avaya P334T-ML Switch User Manual


 
Avaya P334T-ML User’s Guide 155
Chapter 13
Troubleshooting the Installation
Troubleshooting the Installation
This section will allow you to perform basic troubleshooting of the installation. If
you are unable to solve the problem after following the procedures in this chapter,
please contact Avaya Technical Support. Refer to “How to Contact Us“ for full
details.
Table 13.1 Troubleshooting
Problem/Cause Suggested Solution
Switch does not power up
AC power cord not inserted
or faulty
Check that the AC power cord is
inserted correctly
Replace the power cord
If the cord is inserted correctly, check that the AC power source is working by
connecting a different device in place of the P3330.
If that device works, refer to the next step.
If that device does not work, check the AC power
P3330 AC power supply not
functioning
Use an optional BUPS (Backup Power
Supply)
Contact your local Avaya distributor. The
power supply is not user-replaceable.
Stacking not functioning
Stacking modules not
inserted correctly
(LEDs on stacking module
do not light)
Check that modules are installed
correctly
Octaplane cables not
installed correctly
(LEDs on stacking module
do not light)
Check that the cables are inserted
correctly
Check that there are no cross-corrections