Filter
Top Products
You must re-enter your access password to make any further changes to
the printer settings.
Setting NetWare Parameters
You can modify the NetWare parameters from your Web browser. To update
NetWare settings, use Telnet console commands. See Chapter 6, “Telnet
Console Commands” for more information.
1. From the side menu, click NetWare.
2. Click the name of the enable service to modify the NetWare parameters
for that service. See “Configuring Print Services
” for more information.
You can also change the network frame type (packet format),
NetWare password, or disable NetWare.
3. When you are finished, click Submit.
4. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
5. Click Submit and wait five seconds for the printer to reset. Even though
you submitted your changes on the previous screen, they do not take
effect until you reset the printer.
4-6 Ethernet Operating Instructions