Filter
Top Products
Updating Firmware
You can update the printer’s firmware. Make sure the Resident (Boot
Loader) is version 2.3 or greater.
1. From the side menu, click Admin. The Web Admin Configuration screen
appears.
2. Click Update Firmware.
3. The printer should be connected and ready to receive data.
4. Type the TFTP Server IP address.
5. Type the relative pathname (relative to your TFTP server). Refer to your
TFTP Server’s documentation for more information about setting up and
using the TFTP server.
Note: Depending on your TFTP server, you may only need the filename,
not the entire path.
6. Click Submit to load the firmware. If you lose power while updating the
firmware, call Service.
Using the Web Interface 4-23