Filter
Top Products
Setting the Network Card Access Password
When set, the network card access password allows you to view the Web
interface and the remote console. The default is access. The password is
case-sensitive and stored in the printer’s flash memory.
Make a note of the password if you change it.
Changing the password also restricts access to
Telnet sessions.
1. From the side menu, click Admin. The Web Admin Configuration screen
appears.
2. Click Configure Network Card Access Password.
3. Enter a new network access password.
4. Retype the new password to confirm it.
5. Click Submit.
4-16 Ethernet Operating Instructions