Filter
Top Products
You must re-enter your access password to make any further changes to
the printer settings.
Changing TCP/IP Settings
Only configure the settings required for your network/printer.
1. From the side menu, click TCP/IP.
2. Click the name of the enabled service to modify the TCP/IP parameters
for that service. See “Configuring Print Services
” for more information.
3. You can change protocols, assign an IP address, subnet mask, gateway
and more.
Note: If you disable the IP protocol, you will not be able to configure the
printer from your Web browser.
4. When you are finished, click Submit.
5. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
6. Click Submit and wait five seconds for the printer to reset. Even though
you submitted your changes on the previous screen, they do not take
effect until you reset the printer.
Using the Web Interface 4-7