Filter
Top Products
Chapter 5: CCM Appliance Commands 59
Port Break command
The Port Break command sends a serial break signal to the device to which you are attached.
Access right: BREAK
Access level: ADMIN or APPLIANCEADMIN
Syntax
PORT BREAK
Port History command
The Port History command accesses a serial port’s history mode while you are attached to the port.
When you are in history mode, the PORT HISTORY> prompt appears, and you may search the
port’s history buffer for specified strings.
For more information, see Managing Port History on page 33.
Access right: none needed
Access level: all
Syntax
PORT HISTORY
When you are in port history mode, you may issue the commands listed in Table 3.6 on page 33.
Examples
The following command accesses the serial port’s history mode.
> port history
In history mode, the following command searches the history buffer in the downward direction for
the string “connected to,” ignoring case.
PORT HISTORY > s -d -i “connected to”
Port Logout command
The Port Logout command terminates the CCM appliance session on a specified port. If more than
one session is active on the port, all sessions are logged out.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
PORT <port> LOGOUT
Table 5.9: Port Logout Command Parameter
Parameter Description
<port> Port number or name.