Filter
Top Products
Single port PS2 KVM over IP
Port number at which PS/2 KVM over IP switch’s Remote Console server and HTTPS server are
listening. If left empty the default value will be used.
. HTTP port
Port number at which PS/2 KVM over IP switch’s HTTP server is listening. If left empty the
default value will be used.
. Telnet port
Port number at which PS/2 KVM over IP switch’s Telnet server is listening. If left empty the
default value will be used.
. Bandwidth limitation
The maximum network traffic generated through the PS/2 KVM over IP switch Ethernet device.
Unit is K bit/s.
. Disable Enterprise Management
With this option you may exclude this PS/2 KVM over IP switch from management.
5.5.1 Dynamic DNS
PS/2 KVM over IP switch provides a Dynamic DNS service that can be used in the following
scenario (see Figure 5.13):
Figure 5.13 Dynamic DNS Scenario
PS/2 KVM over IP switch is reachable via the IP address of the DSL router, which is dynamically
assigned by the provider. Since the administrator doesn’t know the IP address assigned by the
provider, PS/2 KVM over IP switch connects to a special dynamic DNS server in regular intervals
and registers its IP address there. The administrator may contact this server as well and pick up
the same IP address belonging to his card.
The administrator has to register a PS/2 KVM over IP switch that is supposed to take part in the
service with the Dynamic DNS Server. He will get an approved nickname and password in return
to the registration process. This account information is needed in order to determine the IP
address of the registered PS/2 KVM over IP switch.