Filter
Top Products
Single port PS2 KVM over IP
and use the Remote Console. Even his user name and password can only be changed by
the ’super’ account. Upon delivery, both accounts have the password ’pass’. Make sure to
change these passwords immediately after you have installed and firstly accessed your PS/2
KVM over IP switch.
While the ’user’ account never sees the following options, the ’super’ account can change the
name and password for both accounts. Figure 5.16 shows the User Settings Panel panel of the
front-end. Its use will be described in the following text.
Figure 5.16: User/Group Management
. Existing user
Select an existing user for modification. Once a user has been selected, click the lookup
button to see the user information.
. User name
The new user name for the selected account.
. Password
The password for the login name. It must be at least four characters long.
. Confirm password
Confirmation of the password above.
Pressing the Apply button finally changes the values permanently in PS/2 KVM over IP switch.