Filter
Top Products
UNIX
Windows
OS/2
Macintosh
Appendix A: Test Button AXIS 540/640 User’s Manual
148
NetWare
Appendix A Test Button
The test button is located on the front right hand side of the AXIS
540/640 and is used for:
• Printing a test page, checking the connection to the printer.
• Printing a parameter list, showing the AXIS 540/640 current set-
tings.
• Resetting the AXIS 540/640 parameters to the factory default
settings.
The Test Page Press the test button once to print a test page. If the test page prints,
the parallel interface is functioning correctly. The printed Test Page
contains basic information about the AXIS 540/640. It is
recommended that you print a test page every time you have
connected the AXIS 540/640 to a printer.
The Parameter List Press the test button twice to print a parameter list showing the
current AXIS 540/640 settings. This list provides comprehensive
details of all the parameters and their current status. Refer to
B - The Parameter List, on page 150.
If you want to change any of the parameters, use one of the methods
that are described in
Section 9 Management & Configuration, on page 108.