Filter
Top Products
UNIX
AXIS 540/640 User’s Manual Section 8: Setting Up - UNIX
93
Section 8 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Assigning an IP address, on page 31 and onwards, you are now able to
print in interactive mode using LPR, FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 540/640 into your
host spooler, you can use the Axis automatic installation script
axinstall. This utility software is resident on the AXIS 540/640 and
can be downloaded to your host using FTP, so no disks are required.
The axinstall script can also be downloaded from the Axis WWW
home page at http://www.axis.com/ and it is available on the AXIS
Online CD.
Having completed this operation, the printer connected to the AXIS
540/640 will appear as though they are directly connected to the host
printer spooler.
If you intend to operate your AXIS 540/640 in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 4 Setting Up - NetWare, on page 44
Section 5 Setting Up - Windows, on page 55
Section 6 Setting Up - OS/2, on page 81
Section 7 Setting Up - Macintosh, on page 87