Filter
Top Products
Macintosh
AXIS 540/640 User’s Manual Section 7: Setting Up - Macintosh
87
Section 7 Setting Up - Macintosh
Having connected the AXIS 540+/542+ to your network, this section
now describes how to set up your AXIS 540+/542+ for printing in
Macintosh environments using AppleTalk.
If you intend to operate your AXIS 540+/542+ in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - NetWare, on page 44
Section 5 Setting Up - Windows, on page 55
Section 6 Setting Up - OS/2, on page 81
Section 8 Setting Up - UNIX, on page 93
Note: ❏ The AXIS 640 and the AXIS 642 models do not support printing
in the Macintosh environment.
Installation Using the Chooser Window
Basic Configuration Basic configuration in AppleTalk is performed simply by opening the
Chooser window and selecting a printer.
You can change the default name of your AXIS 540+/542+ or any of
default parameters by editing the config file. To access the config file
from a Macintosh, you can use:
• any Java enabled Web browser
• FTP using MacTCP, Fetch or Anarchie
In order to use any of the methods, you must assign an IP address to
the AXIS 540+/542+ as described in Setting Parameters, on page 91.