NetWare
AXIS 540/640 User’s Manual Section 4: Setting Up - NetWare
53
Notes: ❏ If the PSERVER_NDS parameter includes the name of a tree and
not a specific file server, RCONAG6.NLM must be running on at
least one file server in the specified tree.
❏ If the IPX and IP transport protocols are enabled in your network,
you can use AXIS NetPilot to install the AXIS 540/640 and to
connect print queues. Please refer to Basic Setup with AXIS
NetPilot, on page 27 and Advanced Installation using AXIS
NetPilot, on page 48.
❏ Pure IP requires that you run NetWare 5 or higher.
PSERVER_NDS
parameter
As shown in the instructions in Installing the AXIS 540/640, on page
52, the PSERVER_NDS parameter specifies which NDS tree or file
server the AXIS 540/640 will login to. It also specifies the path to the
print server object in the tree. The syntax of the PSERVER_NDS
parameter is displayed in the following examples:
Example 1:
TREE:NW5_TREE DevDept.acme
In this example a print server named DevDept, with context acme,
will login to the tree, NW5_TREE.
Example 2:
171.16.2.249 DevDept.acme
In this example a print server named DevDept, with context acme,
will login to a file server with the IP address 171.16.2.249. If you have
a (D)DNS server on your network you can replace the IP address with
the host name.