Filter
Top Products
NetWare
UNIX
Windows
OS/2
Macintosh
Appendix B: The Parameter List AXIS 540/640 User’s Manual
150
Appendix B The Parameter List
This appendix provides an overview of the AXIS 540/640 parameters.
Please refer to the AXIS Network Print Server Technical Reference for
a complete description of the parameters. Alternatively, you can access
the Axis WWW Home Page at http://www.axis.com/, where you can
download the latest technical information.
The Config File The left-hand column shows the parameters and their default values as
they appear in the config file and the right-hand column shows the
name of the parameters as they appear in the internal Web pages.
After you have changed them, most parameters take effect for the next
print job. If Requires Restart appears in a parameter description, you
must restart the AXIS 540/640, before the new setting for that
parameter takes effect.
Please refer to Section 9 Management & Configuration, on page 108,
for more information about how to change the parameters.
Note: ❏ The password parameters, ROOT_PWD and PROS_PWD only
appear when you are logged in to the AXIS 540/640 using root.
The password parameters will not be printed when you are
printing the parameter list using the test button.
--- GENERAL MENU
NODE_ADDR. : 00 40 8C 10 00 86
Node Address
PS_NAME. : AXIS100086
Print Server Name (100086 are the last six digits of the serial number)
ROOT_PWD. : pass
Root Password
USERS. :
User and Printer Access List
BASE_URL. : www.axis.com
Base URL
AXIS_PRINT_SYSTEM.: YES (YES, NO)
Enable compatibility with AXIS Print System
S_ROUTE. : AUTO (OFF, SINGLE, ALL, AUTO)
Token Ring Source Routing Mode (AXIS 640/642 only)
HP_JETADMIN. : NO (YES, NO)
HP JetAdmin Support
DEF_OUT. : PR1 (PR1, PR2, PR3, PR4,
PR5, PR6, PR7, PR8, LPT1)
Internal Printout Destination
SYS_LOC. :
System Location
SYS_CONT. :
System Contact