Filter
Top Products
NetWare
Section 4: Setting Up - NetWare AXIS 540/640 User’s Manual
44
Section 4 Setting Up - NetWare
This section describes how to continue the installation of the AXIS
540/640 in the NetWare environment. Identify which transport
protocol you are running on your network and which installation
method you should use. Continue the installation by selecting the
appropriate installing instructions from the table below:
If you intend to operate your AXIS 540/640 in a multiprotocol, mixed
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 5 Setting Up - Windows, on page 55
Section 6 Setting Up - OS/2, on page 81
Section 7 Setting Up - Macintosh, on page 87
Section 8 Setting Up - UNIX, on page 93
Installation
method
Tr a nspor t
protocol
Action
NDPS
TCP/IP
IPX/SPX
See Setup using NDPS, on page 45
Proceed with Installing the AXIS 540/640 in NDPS environments, on page 46.
Queue based
printing
IPX/SPX
If you have performed the basic installations as described in Basic Setup
with AXIS NetPilot, on page 27, the AXIS 540/640 is already installed for
printing in the NetWare environment.
IPX/SPX
Advanced
configuration
If you need a more advanced installation that is not covered by the AXIS
NetPilot Installation Wizard, continue with Advanced Installation using AXIS
NetPilot, on page 48.
Pure IP
See Basic Queue-based Printing (Pure IP), on page 52