Filter
Top Products
11
Wireless G Router
SECTIONSTable of Contents 1 2 3 5 6 7 8 9 10
CONNECTING AND CONFIGURING YOUR ROUTER
4
Verify the contents of your box. You should have the following:
• Belkin G Wireless Router
• Quick Installation Guide
• Belkin Setup Assistant Software CD with User Manual
• RJ45 Ethernet Networking Cable (for connection of the Router to
the modem)
• Power Supply
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port� Many modems have both an RJ45 Ethernet port and a USB
connection� If you have a modem with both Ethernet and USB, and are
using the USB connection at this time, you will be instructed to use the
RJ45 Ethernet port during the installation procedure� If your modem has
only a USB port, you can request a different type of modem from your
ISP, or you can, in some cases, purchase a modem that has an RJ45
Ethernet port on it�
ALWAYS INSTALL YOUR ROUTER FIRST! IF YOU ARE INSTALLING
NUMEROUS NETWORK DEVICES FOR THE FIRST TIME, IT IS
IMPORTANT THAT YOUR ROUTER IS CONNECTED AND RUNNING
BEFORE ATTEMPTING TO INSTALL OTHER NETWORK COMPONENTS
SUCH AS NOTEBOOK CARDS AND DESKTOP CARDS�
Setup Assistant
Belkin has provided our Setup Assistant software to make installing
your Router a simple and easy task� You can use it to get your Router
up and running in minutes� The Setup Assistant requires that your
Windows 2000/XP, Vista, or Mac OS X v10�4 or v10�5 computer be
connected directly to your cable or DSL modem and that the Internet
connection is active and working at the time of installation� If it is not,
you must use the “Alternate Setup Method” section of this User Manual
to configure your Router� Additionally, if you are using an operating
system other than Windows 2000/XP, Vista, or Mac OS X v10�4 or
v10�5, you must set up the Router using the “Alternate Setup Method”
section of this User Manual�