Filter
Top Products
58
Wireless G Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
4. Under the “Wireless
Networks” tab, click the
“Configure” button and you
will see the following screen�
5. For a home or small business user, select “WPA-PSK” under
“Network Authentication”�
Note: Select “WPA” if you are using this computer to connect to
a corporate network that supports an authentication server such
as a radius server� Please consult your network administrator for
further information�
6. Select “TKIP” or “AES” under “Data Encryption”� This setting will
have to be identical to the Router that you set up�
7. Type in your encryption key in the “Network key” box�
Important: Enter your pre-shared key� This can be from eight to 63
characters and can be letters, numbers, or symbols� This same key
must be used on all of the clients that you set up�
8. Click “OK” to apply settings�