Filter
Top Products
9
1
2
3
4
5
6
7
section
Installation Pre-Configuration
Pre-Configuration
The enclosure of the Rack-Mount Console KVM Switch is designed for
rack-mount configuration in a standard 19-inch server rack. Rack-mount
hardware is included for a sturdy rack installation.
When deciding where to place the Rack-Mount Console KVM Switch, consider
the location of your servers and the length of cables needed to connect those
servers to your Rack-Mount Console KVM Switch.
Cable Length Recommendations
For PS/2 servers
We recommend that PS/2 cable length from the Rack-Mount Console KVM
Switch to your servers be limited to 25 feet for best video performance. Beyond
that length, the probability of video degradation increases.
For USB servers
We recommend that USB cable length from the Rack-Mount Console KVM
Switch to your servers be limited to 12 feet for best video performance.
Installing the Rack-Mount Console KVM Switch into a Server Rack
The Rack-Mount Console KVM Switch includes adjustable mounting brackets
ideal for installation in 19-inch racks.
Please consider the following before mounting your Rack-Mount
Console KVM Switch:
a) Elevated Operating Ambient Temperature – If installed in a closed
or multi-unit rack assembly, the operating ambient temperature of
the rack environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an
environment compatible with the rack manufacturer’s maximum rate
ambient temperature.
b) Reduced Airflow – Installation of the equipment in a rack should be
such that the amount of airflow required for safe operation of the
equipment is not compromised.
c) Mechanical Loading – Mounting of the equipment in the rack
should be such that hazardous condition is not achieved due to
uneven mechanical loading.
d) Reliable Earthing – Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit.