Filter
Top Products
17
1
2
3
4
5
6
7
section
Installation DIP Switch Configuration Chart
DIP Switch Configuration Chart
DIP SWITCH #
BANK ADDRESS
1 2 3 4
Down Down Down Down BANK 00 (Default)
Up Down Down Down BANK 01 Primary/Secondary
Down Up Down Down BANK 02 Secondary
Up Up Down Down BANK 03 Secondary
Down Down Up Down BANK 04 Secondary
Up Down Up Down BANK 05 Secondary
Down Up Up Down BANK 06 Secondary
Up Up Up Down BANK 07 Secondary
Down Down Down Up BANK 08 Secondary
Up Down Down Up BANK 09 Secondary
Down Up Down Up BANK 10 Secondary
Up Up Down Up BANK 11 Secondary
Down Down Up Up BANK 12 Secondary
Up Down Up Up BANK 13 Secondary
Down Up Up Up BANK 14 Secondary
Up Up Up Up BANK 15 Secondary
Installation
Before you begin:
1. Make sure that all servers and KVM devices are powered off and that
each KVM device has been assigned a unique BANK address. The BANK
address for the Rack-Mount Console KVM Switch can be adjusted in the
OSD [refer to the “Unit ID (Assign BANK Address)” section on page 32].
2. Place all primary and secondary KVM devices in the desired location
within your rack or cabinet.