Filter
Top Products
section
27
1
2
3
4
5
6
7
Using your Rack-Mount Console KVM Switch
Scan Column
The “Scan” column displays the current setting for how long the console views
each server during AutoScan. To change the viewing duration for a server, click
in the desired cell.
Scan Time and “Change All” Button
The user can reset the scan time for all servers by entering a value from 1–99 in
the edit box and clicking on the “Change All” button. The user will be asked to
confirm the action before the new time is applied.
Console Column
The console currently viewing the server is indicated in this column.
Security Page
The “Security” page allows the administrator to assign user-access permissions
for each connected server. There are three levels of user access: Admin, User,
and Guest.
NOTE: “Admin”, “Guest”, and “User” refer to an individual logged in as “Guest”
or “User” and operating at that specific access level.
Admin
The Admin is the only user that can access the “Setup” pages to configure the
Rack-Mount Console KVM Switch (or other daisy-chained KVM device). The
Admin can switch between all connected servers and restrict Users and Guests
from accessing specific servers. The Admin can assign access for one Guest
account and up to three User accounts.