Filter
Top Products
1110
1110
Powering Up your Modem/Router
1. Connect the supplied power adapter to the Modem/Router
power-input plug labelled “Power”.
Note: For safety and performance reasons, only use the supplied
power adapter to prevent damage to the Modem/Router.
2. After connecting the power adapter and the power source is turned on,
the Modem/Router’s power icon.
on the front panel should be on. It
might take a few minutes for the Modem/Router to fully start up.
3. Turn on your computers. After your computers boot up, the LAN
status LED on the front of the Modem/Router will be on for
each port to which a wired computer is connected. These lights
show you the connection and activity status. Now you are ready
to configure the Modem/Router for ADSL connection.
Connecting your Modem/Router