Filter
Top Products
7978
Appendixes
7978
Appendixes
3. You have to double-click on a desktop icon other than your
browser to get on the Internet.
To set the Modem/Router to use PPPoE, type in your user name
and password in the spaces provided. After you have typed in
your information, click “Apply Changes”.
After you apply the changes, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly.
PPPoA
Enter the PPPoA information in the provided spaces, and click “Next”.
Click “Apply” to activate your settings.
1. User name - Enter the user name. (Assigned by your ISP).
2. Password - Enter your password. (Assigned by your ISP).
3. Retype Password - Confirm the password. (Assigned by your ISP).
4. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. (Assigned by your ISP).
Disconnect after X...
This feature is used to automatically disconnect the Modem/Router
from your ISP when there is no activity for a specified period of time.
For instance, placing a check mark next to this option and entering
“5” into the minute field will cause the Modem/Router to disconnect
from the Internet after five minutes of no Internet activity. This option
should be used if you pay for your Internet service by the minute.
Channel and SSID
To change the channel of operation of the Modem/Router, select the
desired channel from the drop-down menu and select your channel.
Click “Apply Changes” to save the setting. You can also change the
SSID. The SSID is the equivalent to the wireless network’s name. You
can make the SSID anything you want to. If there are other wireless
networks in your area, you should give your wireless network a unique
name. Click inside of the SSID box and type in a new name. Click
“Apply Changes” to make the change.