Filter
Top Products
1716
Setting Up your Computers
1716
Setting Up your Computers
4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should
see “Manually” or “Using DHCP”. If you do not, check the
PPPoE tab (5) to make sure that “Connect using PPPoE” is
NOT selected. If it is, you will need to configure your Modem/
Router for a PPPoE connection type using your user name and
password.
5. If “Manually” is selected, your Modem/Router will need to be set
up for a static IP connection type. Write the address information
in the table below. You will need to enter this information into the
Modem/Router.
6. If not already selected, select “Using DHCP” next to “Configure”
(4), then click “Apply Now”.
Your network adapter(s) are now configured for use with the
Modem/Router.