Filter
Top Products
41
Manually Configuring your Modem/Router
Manually Configuring your Modem/Router
41
Manually Configuring your Modem/Router
section
2
1
3
4
5
6
7
8
9
10
11
12
WEP Setup
64-Bit WEP Encryption
1.
Select “64-bit WEP” from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually.
A hex (hexadecimal) key is a mixture of numbers and letters from A–F
and 0–9. For 64-bit WEP, you need to enter 10 hex characters.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
3. Click “Apply Changes” to finish. Encryption in the Modem/Router is
now set. Each of your computers on your wireless network will now
need to be configured with the same security settings.
WARNING:
If you are configuring the Wireless Modem/Router or
access point from a computer with a wireless client, you will lose
your connection until you enable security on your wireless client.
Please be sure to write down your key before applying changes