Filter
Top Products
724-746-5500 | blackbox.com
Page 53
Chapter 5: Operation of Web-based Management
Packet Type:
All: Forward all tagged and untagged packets.
Tagged Only: Forward tagged packets only and discard untagged packets.
PVID: This PVID range will be 1–4094. Before you set a number x as PVID, you have to create a Tag-based VLAN with VID x. For
example, if port x receives an untagged packet, the switch will apply the PVID (assume as VID y) of port x to tag this packet, the
packet then will be forwarded as the tagged packet with VID.
Function name: Port-Based VLAN Configuration (Port-based VLAN mode)
Function description shows the VLAN Groups’ information, and allows administrators to maintain them by modifying and deleting
each VLAN group. Users also can add a new VLAN group by inputting a new VLAN name and VLAN ID.
If you are in a port-based VLAN, it will just show the ID member of the existing port-based VLAN group. If you are in a tag-based
VLAN, it will show the ID, VID, and member of the existing tag-based VLAN group. The switch can store the port-based VLAN
and tag-based VLAN configurations separately. When you choose one of VLAN modes, the switch shows the VLAN
configuration, which keeps the default data. You can easily create and delete a VLAN group by pressing the “Add” and “Delete”
function buttons, or click the Group ID directly to edit it.
Figure 5-10. Port-Based VLAN Configuration.