Filter
Top Products
24
Using the BF900
To add a name:
• Press
1. Display shows NAME=A~Z,
(UP ARROW), *, ENTER.
• Use the alphabet letters on the one-touch
numbers to add a name.
• Press the
ENTER button. Display shows
DATA ENTRY OK followed by NETWORK ADDRESS
0=(NO) 1=(YES).
If you press
0 the display shows SPEED DIAL.
You can now enter another number or press
STOP to return to standby.
To add a net address
• Press
1. Display shows NET ADDRS=PRESS
ENTER.
• Use the keypad to enter the net address you
want.
• Press the
ENTER button. Display shows
DATA ENTRY OK followed by SPEED DIAL
PRESS ENTER.
• You can now enter another number or press
STOP to return to standby.
ENTER
STOP
1
ENTER
STOP
1
0
To store numbers under a Group Dial button
You can set 8 of the One-Touch buttons as
Group Dial buttons. These are buttons 25-32.
Each one can hold up to 40 fax numbers.
Only fax numbers already stored as One-Touch
or Speed Dial numbers can be entered under
the Group Dial buttons.
• Press the
FUNCTION button. Display shows
FUNCTION MODE 0~9,#,*,<,>.
• Press
7 (or the buttons) to display
PROGRAM TEL. NO 0~9,#,*,>, ENTER.
• Press the
ENTER button. Display shows
PROGRAM TEL NO. 1-5, <,>.
• Press
3 (or the arrows) to display
GROUP DIAL 1-5 ENTER.
• Press the
ENTER button. Display shows
GROUP DIAL PRESS OT 25~32.
• Press the One-Touch button (
25-32) that
you want. Display shows
*25+ <,>, ENTER.
• Press the
ENTER button. Display shows
LOC. COUNTER=00. SEL. LOC/ENTER.
• Enter the phone numbers you want by
pressing either a
ONE-TOUCH button or the
SPEED DIAL button then the 3 digit location
code. If a name has been stored along with
the number, both are displayed alternately.
• Press the
ENTER button after selecting each
fax number. The LOCATION COUNTER
increases after each number is added.
FUNCTION
7
ENTER
3
0
1
STOP
A
SPEED-DIAL