Filter
Top Products
44
Connecting to
a switchboard
Connecting to a swi tchboard
If you want to connect your BF900 to a
switchboard, (also known as a PBX), you can
take advantage of its PBX mode.
You can also follow these steps to switch back
to PSTN for connection to the normal public
network.
• Press the
FUNCTION button. Display shows
FUNCTION MODE 0~9,#,*,<,>.
• Press
✱
(or the buttons) to display
DIAL OPTIONS 0~9,#,*,<,> ENTER.
• Press the
ENTER button. Display shows
DIAL OPTIONS 0~9 <,>.
• Press
2 (or the arrows) to display
PSTN/PBX 1-9 ENTER.
• Press the
ENTER button. Display shows
PSTN/PBX PSTN: >, ENTER.
• Use the
> button to display PSTN or PBX.
• Press the
ENTER button to confirm the
setting.
• If you chose
PSTN, the display will show
PSTN/PBX DATA ENTRY OK and then returns
to standby.
• If you have chosen PBX the display shows
PREFIX NO=PRESS ENTER.
• Use the keypad to enter the prefix number
you need to dial in order to get an outside line.
• Press the
ENTER button. Display shows
PRE-FIX NO=123 DATA ENTRY OK and then
returns to standby.
To change the dial mode
Most modern telephone equipment uses Tone
dialling. This should only be changed if Pulse
dialling is required in order for your BF900 to
work with your switchboard.
• Press the
FUNCTION button. Display shows
FUNCTION MODE 0~9,#,*,<,>.
• Press
✱
(or the buttons) to display
DIAL OPTIONS 0~9,#,*,> ENTER.
• Press the
ENTER button. Display shows
DIAL OPTION 9 <,>.
• Press
1 (or the arrows) to display
TONE/PULSE 1-9 ENTER.
• Press the
ENTER button. Display shows
TONE/PULSE TONE: >, ENTER.
• Use the
> button to select TONE or PULSE.
• Press the
ENTER button to confirm the
setting. Display shows
TONE/PULSE DATA
ENTRY OK and then returns to standby.
FUNCTION ENTER
*
2
JOURNAL
FUNCTION ENTER
*
1
JOURNAL