Filter
Top Products
6
Setting up
When setting up refer to ‘At a glance’ on page 1
for location of sockets and buttons.
Setting upfollow these steps to get your BF900 ready
to use.
Remove the adhesive strips securing the
control panel and plain paper cassette.
1 Insert the drum and toner
cartridges
Press the cover release button and open the top
of your BF900.
Unpack the drum cartridge.
With the ‘L’ mark to the left and the ‘R’ mark to
the right, line up the drum cartridge with the
slots on the inside of your BF900, as indicated
by the green labels inside the machine, and slide
the whole cartridge down into place.
Unpack the toner cartridge.
Hold the cartridge in both hands and shake
well, using a rocking motion as illustrated.
Caution
Do not touch the green drum with your fingers.
Cover
release
button