Brother 2170W Printer User Manual


 
4-1
Confidential
CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS,
REQUIRED AFTER PARTS REPLACEMENT
1. IF YOU REPLACE THE MAIN PCB
<What to do when replacing the main PCB>
Rewriting the firmware (Main Program)
Setting the default paper size
Setting the serial number
Inputting the adjusted value of the laser scanner
Setting the toner cartridge type
Backup to the Main PCB of the Wireless LAN PCB Information (HL-2170W only)
<Which parts to use>
Main PCB: The table below shows the ROM type.
<What you need to prepare>
(1) Computer (Windows
®
XP or later)
Create the "hl2100" folder in the C drive, for example.
(2) HL-2140/2150N/2170W target machine
(3) Firmware
(4) Maintenance Tool (MAINTE.zip)
Copy it into the "hl2100" folder that has been created in the C drive. Extract the copied
file and run "brmainte.exe" file by double-clicking.
(5) USB cable (one piece)
HL-2140 MAIN PCB ASSY 2140
FW:MAIN CONTROLLER 2140
HL-2150N MAIN PCB ASSY 2150N
FW:MAIN CONTROLLER 2150N
HL-2170W MAIN PCB ASSY 2170W
FW:MAIN CONTROLLER 2170W
Model Main PCB (For a production part/For a supplied part.)
HL-2140 512 Kbyte Flash ROM x 1
HL-2150N 8 Mbyte Flash ROM x 1
HL-2170W 8 Mbyte Flash ROM x 1
Main Program :
LZXXXX_$.djf
LZXXXX: First six digits are a parts number of the firmware.
$: Alphabet representing the revision of the firmware