Brother MFC-685CW All in One Printer User Manual


 
34
5
Entering Fax mode 5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in green.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
Fax Resolution (See page 38.)
Contrast (See page 37.)
Speed Dial (See page 60.)
Outgoing Call (See page 61.)
Caller ID hist. (See page 61.)
Broadcasting (See page 36.)
Delayed Fax (See page 39.)
Batch TX (See page 39.)
Real Time TX (See page 38.)
Polled TX (See page 86.)
Polling RX (See page 85.)
Overseas Mode (See page 39.)
Scan Size (See page 35.)
Set New Default (See page 40.)
Factory Reset (See page 40.)
When the option you want is highlighted,
press OK.
Faxing from the ADF 5
a Press (Fax).
b Put the document face down in the ADF.
(See Using ADF on page 10)
c Enter the fax number using the dial pad,
Speed Dial or Search.
Note
You can preview a fax message before
sending it by pressing Fax Preview. For
details, see How to preview an outgoing
fax (Black & White only) on page 77.
d Press Black Start or Color Start.
The machine starts scanning the
document.
Note
To cancel, press Stop/Exit.
If you send a black & white fax when the
memory is full, it will be sent in real time.
Sending a fax 5
Fax Resolution
FAX/TEL
Standard
Auto
Speed Dial
Outgoing Call
Contrast
Fax Start Press