Filter
Top Products
9-4 BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 9 Maintenance
2. Oiling
To extend the machine's service life, supply oil to the following places at regular intervals.
The models BE-0901E-AC-PC and BE-1201B-AC-PC adopt centralized wick lubrication (including
rotary hooks). Before daily operation, supply oil as needed while checking the oil level through the oil
window.
Note) • When oiling, be sure to supply Brother's machine oil (Nisseki Sewing Lube #10 or the equivalent)
using the dropper.
• Excessive oiling may cause the material to be stained.
• Lubricate the rotary hook.
2-1 Head
! When the machine has been unpacked or has not been used over a prolonged period
W1614
! BE-0901E-AC-PC
W1615
Supply 7 or 8 drops of oil to the points indicated
by the arrows in the figure before starting
operation.
Supply oil to the top and the bottom of each
needle bar (18 points) daily as shown in the
figure.