Filter
Top Products
III-16
3.11 Base Plate ASSY
Note: Prior to turning the printer upside-down, ensure that the drum unit has been
removed from the printer.
(1) Turn the printer upside down.
(2) Remove the five M4 and four M3 self tapping screws and one screw.
Fig. 3.24
(3) Lift the base plate ASSY and remove the grounding screw.
Fig. 3.25
Base plate ASSY
Ground wire
Screw
Low-voltage power
suppl
y
PCB ASSY
Screw
Taptite, cup M3x2
Taptite
,
cup M3x2
Taptite, bind M4x2
Taptite
,
cup M3x2
Base plate ASSY
Soundproof sponge