Filter
Top Products
III-17
Note: See the Fig. 3.26 about the position installing the dumping material and the
soundproof sponge A,B.
Fig. 3.26
3.12 Driver PCB ASSY
(1) Remove the screw securing the driver PCB ASSY. (Slide the PCB A from
underneath the main shield.)
Fig. 3.27
Screw
Driver PCB ASSY
Main shield
Driver PCB ASSY
<The inside of the base plate>
Insulation tape
<The outside of the base plate>
A
Dumping material
Soundproof
spon
g
e A
Soundproof
spon
g
e B
Soundproof
sponge A