Filter
Top Products
Chapter 12
60
c Make sure that there is over
4 in. (10 cm) of free space behind the
machine.
1 4 in. (10 cm)
d Firmly place a printable disc on the Disc
Tray.
Note
• Make sure the disc is placed print side
face up onto the Disc Tray.
• Make sure there is no dirt on the Disc
Tray.
e Insert the Disc Tray into the Disc Guide
and line up the triangular marks.
f After the disc has finished printing, close
the Disc Guide and store the Disc Tray
back in the scanner cover.
IMPORTANT
• If the printing area shifts and the Disc Tray
or the transparent area near the center of
the disc gets printed on, immediately wipe
off the ink from those areas.
• Always close the Disc Tray and store it in
the scanner cover after printing. If you do
not, the Disc Tray may become warped or
bent and cause a malfunction when used.
1